What exactly is the nose? Look at these 5 principles

Many people like to take their favorite star for plastic surgery, “I want a nose like XXX”. From the perspective of ordinary people, this is certainly their own aesthetic needs, but for doctors, this is not just the nose. Count. Whether the nose bridge is skewed, the nose is skewed can be seen at a glance. But many people don’t know why they are. Some skews require correction of the nasal septum, and some even require osteotomy. The central axis of the nose divides the face into two symmetrical parts, that is, the straight line from the interbrow area to the subchin point bisects the bridge of the nose, the tip of the nose, and the arch of the lips. This is obvious to the naked eye. The width of the nose wings The width of the nose wings should be approximately equal to the inner canthus spacing, which is about the width of one eye, which is the “one eye” in “Three Courts and Five Eyes”, as shown in the figure below. If the width of the nose is greater than the width of the eye (inner canthus), then it needs to be corrected by comprehensive rhinoplasty or nose reduction surgery. Nasal septum underdevelopment, nose drooping and other reasons will cause hypertrophy of the nose, so many people want to raise the bridge of the nose and the tip of the nose to improve the condition of the hypertrophy of the nose, and it will make the entire nose much more beautiful. The normal shape of the nose tip There are four signs of the shape of the nose tip: the performance points on both sides of the nose, the upper corner of the nose tip, and the nasal column-lobular angle. Connecting these four points will form two equilateral triangles. If any of these four points is not in the correct position, you need to determine which mark is not in the correct position and the reason, and you need to perform nose tip modification surgery to correct this problem. Normal shape of the nasal column The position of the nasal column should hang just under the nose flange, so that the outline formed by the nose flange and the lowest part of the nose column behaves like a seagull spreading its wings gently. If this line is too curved, it means that the lower leaflet under the tip of the nose is too high and needs to be reduced; if it is a straight line, it means that the nasal column is too little exposed, and the nasal column needs to be filled or the nose flange is moved up. However, when viewed from above, the outline of the nasal column and the bottom of the nose should be an equilateral triangle, and the ratio of the nasal column to the lobular part is 2:1, so that the nostrils forming a drop shape are also very beautiful. There are several methods for calculating the nose tip protrusion and nose length when calculating the nose tip protrusion. One is to evaluate by drawing a line from the nose to the cheeks. When the upper lip protrusion is normal, draw a vertical line near the most protruding part of the upper lip. If sufficient nose tip protrusion is to be achieved, a certain percentage of the horizontal line should be located Before this vertical line. Of course, this only applies to the beauty seekers with normal upper lip protrusion. If there is a depression in the base of the nose, it is also necessary to consider the method of filling so that the surrounding of the nose is not “sinked”. Before the operation, Ji Xianlin, a real customer from Shanghai Huamei Medical and Aesthetic Hospital, shared the idea that stolen pictures would be necessary to improve the shape of the nose. The basic nose aesthetic is very important, but no matter which standard is just a reference example in medical education, everyone In the facial structure, doctors with rich experience in technology and aesthetics are still needed to check. Ji Xianlin, a real customer from the Shanghai Huamei Medical and Aesthetic Hospital, shared after surgery that every fine adjustment of the nose should be able to change his temperament, and the higher the nose shape, the better the look. Of course, we still need to remind everyone that you need to find a professional hospital and a professional doctor for peace of mind.

Factors that determine the width of both eyelids

The precise design positioning of the double eyelid line is only a small step before surgery, because the design line is only an important factor in determining the width of the double eyelid. In clinical practice, such a situation often occurs. The line design of the eyes on both sides is basically the same, but the width of the lines after the operation is different. Sometimes the design lines on the two sides are obviously different, but the width of the double eyelid line is basically the same. &nbsp. Next, I will analyze the factors that determine the width of the double eyelids. The factors of the skin suture position are often written in textbooks 6-8mm to explain the design width range of the double eyelid. In fact, there are many factors that determine the width of the double eyelid, and it is not as simple as drawing a line. The pre-operative design line is to determine the location of the stretched skin, which is very close to the width of the double eyelid. Within a certain range, the higher the design position, the wider the double eyelid fold line. &nbsp.&nbsp. 2. Factors of the levator muscle or meibomian suture position (including the levator muscle opening and closing factor) in addition to the design of the point of care, the muscle strength of the levator muscle also has a very important effect on the width of the double eyelid and folds. &nbsp. When the levator displacement is different, the width of the double eyelid line is also different. 1. When the normal muscle strength is open, a deep double eyelid fold is formed; when the levator muscle is weak, the mobility is poor, and the double eyelid line is shallow and wide. Patients with ptosis cannot form a deep double eyelid fold, which is the reason for the insufficient displacement. In other words, although the double eyelid fold is relatively wide, it appears to be inexplicable due to the low corneal exposure rate! &nbsp. Under normal muscle strength, even if the design line of the double eyelid is the same, if the position of the levator muscle or the eyelid plate is different, it may result in a different width of the double eyelid. three. The factor of skin peeling amount has a great influence on the width of double eyelid. Under the premise that the muscle strength is normal, the design line of the double eyelid is the same, and the position of the levator muscle or the eyelid plate is the same, the more loose the skin, the more the upper lip skin covers the lower lip skin after reflexion, the more the double eyelid fold line appears narrow. It can be seen that, within the limit and reasonable range, the greater the amount of peeling during double eyelid surgery, the wider the double eyelid width. &nbsp. Factors of the volume of the lower lip tissue&nbsp. The height difference of the eye is limited by the fold line of the double eyelid, the relative height of the incision upper lip (the area between the double eyelid line and the eyebrows) and the lower lip (the area between the double eyelid line and the eyelashes) . Generally, the upper lip should be higher than the lower lip: the upper lip is slightly thicker, forming a sense of high-land fold, and the lower lip is easily folded into the upper lip, forming a natural and beautiful double eyelid appearance. &nbsp. Factors of tightness of incision adhesion The more firmly the double eyelid incision is adhered, the firmer the site of suture and attachment point is. Whether the thread is buried or the double eyelid is cut, the tissue of the adhesion site will gradually relax and shift downward. That is, the position of the fixed point of the double eyelid suture is also moved downward, and the width of the double eyelid will be narrowed. The double-embedded thread is most likely to loosen because the scar is lightly adhered and the nylon thread is cut.

Prosthesis breast augmentation, what size prosthesis is better?

Recently, the new epidemic in Beijing has affected the flow of people. Many foreign customers who have scheduled breast augmentation surgery are afraid to enter Beijing… But fortunately, the hospital where I operated was in a “low-risk” area. You don’t have to worry, we are all safe. Introduce a “common” case today! Customer Beijinger, 34 years old, breast atrophy after marriage and childbirth. Preoperative evaluation: 163cm/44kg, BMI16.5, very thin! 7.5cm difference between upper and lower bust! Customers hope that the chest will be “full and natural” after the operation! According to the nipple spacing 14cm, breast base width 12cm, choose smooth round high protrusion prosthesis 275cc! Underarm approach endoscopic assisted double plane technology! Immediately during the operation! The following is the post-operative recovery process: post-operative recovery is very smooth, and was discharged after 4 days of hospitalization. There is no congestion and the swelling is very light. Comparison before and after surgery! Summary: 1. The size of the prosthesis depends on the body mass index! Too thin is not suitable for “big” prosthesis! 2. The size of the prosthesis depends on the breast width. In principle: the width of the prosthesis = the width of the breast base-1.5 (±0.5) cm. 3. The size of the prosthesis depends on the nipple spacing! This customer’s nipple spacing is 14cm! The value is “minimal”! Therefore, the “large” prosthesis cannot be selected. 4. The size of the prosthesis depends on the elasticity of the breast skin! Generally, breast skin becomes loose after breastfeeding and can accommodate a relatively “large” volume of prosthesis. 5. Choose the size of the prosthesis can refer to the customer’s preoperative requirements! If the customer wants a larger “cup” after the operation, he can try to choose the “high protrusion” prosthesis under the condition of the existing breast width! In this way, a prosthesis with a relatively “large” capacity can be selected! Do you understand? If you want to know how big a prosthesis is for you? You can send me the measurement data, I will give you an assessment! &nbsp.&nbsp.&nbsp.&nbsp.&nbsp.&nbsp.&nbsp.&nbsp.&nbsp.&nbsp.&nbsp.&nbsp.&nbsp.&nbsp.&nbsp.&nbsp.&nbsp.&nbsp.&nbsp.&bb.

Look here, take you to understand the turbinate and osteotomy

First, the process and theory of turbinate surgery: after the septum is centered, the degree of obstruction caused by turbinate hypertrophy or deformity is determined. After the nasal cavity was established, turbinate surgery was performed. After the operation of the turbinate and the fixation of the splint in the cavity, the second shaping of the nose tip is performed. This strategy can prevent the pulling force from destroying the fragile nose tip after shaping. Principle: The most common turbinate deformity that causes airway obstruction is inferior turbinate hypertrophy. After correcting the deviation of the nasal septum and before narrowing the base of the nasal bone, the necessity of the removal of the turbinate was determined to be limited to the part that caused the obstruction (usually the anterior lower part of the inferior turbinate). Trim the turbinate or (and) mucosa according to the part that causes hypertrophy. The front of the airway is most affected by the narrowing of the base of the nasal bone. As far as possible, maintain or restore the integrity of the turbinate mucosa to reduce the risk of bleeding or obstructive adhesions in the nasal cavity. Second, the process and theory of osteotomy: the anatomical structure of the osseous and cartilaginous nasal dorsum is usually changed after the nasal bone osteotomy is repositioned, and the relationship between them is changed. Since the osteotomy can affect the height of the back of the nose, after all the osteotomy is completed, the final shaping of the back of the nose and the tip of the nose is performed. According to the type of osteotomy, the degree of loosening movement and the support strength of soft tissue and mucosa, the dorsal side of nasal bone and superior lateral cartilage can move forward (upper) or posterior (lower). Osteotomy affects the width of the base of the nasal bone. Because the width and the width of the nasal wing should be coordinated and beautiful, after the nasal bone osteotomy is repositioned, it is decided (whether) to remove the wing by wedge shape to adjust the width of the wing base. In most cases, nasal bone osteotomy should be performed before closing the nasal plastic incision. Closing the osteotomy before closing the incision allows the surgeon to observe and adjust the dorsal nasal structure and the repositioning of the nasal bone more accurately after the osteotomy. When osteotomy is the final step of the operation, bleeding may affect the visual field, limiting the ability to check and correct changes in the back of the nose, sacrificing the accuracy and controllability of the operation when closing the incision. After osteotomy, if the nasal bone is moved or displaced excessively to the rear, it can be moved to the nasal vestibule. Therefore, the back of the nose must be visually observed after the osteotomy to confirm the displacement of the posterior nasal bone during the operation. If the diagnosis is missed during the operation, there will be an inverted V-shaped deformity or a “blade” deformity of the dorsal nasal septum after surgery, which requires surgical repair. Complete the osteotomy early in the operation, and repeatedly check the back of the nose after the osteotomy can prevent the above problems. Principle: The osteotomy is completed early in the surgical procedure. Although higher requirements are placed on the surgeon’s technology, it has many of the above advantages. The use of specific techniques for accurate osteotomy has little bleeding and avoids damage to the deep mucosa of the osteotomy line. The ability to check and adjust the back of the nose after the osteotomy can reduce many risks, such as the uneven shape of the back of the nose, or other secondary deformities that require surgical repair. To reduce the above risks, certain osteotomy skills are required to reduce bleeding and allow the nose to be fully inspected after the osteotomy. The adjustment of the base of the nasal bone will affect the aesthetic relationship between the parts of the base of the nasal pyramid, especially the width of the nasal bone and the posterior side of the upper lateral cartilage, and the relationship between the width of the osseous base and the width of the base of the alar wing. In addition to evaluating the relative ratio of the width of the alar base to the inner canthus spacing, the relationship between the width of the nasal bone and the upper lateral cartilage base should be evaluated to determine the necessity of narrowing the base of the nasal bone and pushing the nasal bone base to narrow the nose, It will definitely cause a certain degree of narrowing of the nasal vestibule and affect the airflow. Osteotomy may be at the expense of airway function at the cost of perfection and beauty. Before this, the septum and turbinate deformity should be corrected to assess the patency of the airway.

Are prostheses smaller than 300 not large enough?

Recently, customers who have been doing prosthetic breast augmentation have a concern. Is their prosthesis “too small”? Let’s look at a case: a customer from the southwest, 32 years old, breast atrophy after breastfeeding, discussed in breast augmentation group, netizens in the group are also introducing each other’s “experience”, in short, the group agreed “The opinion is: doctors must be asked to make “large” prostheses as much as possible. It seems that who does not exceed 300cc, it seems that they will “regret”… Therefore, after she came, she also requested to make more than 300cc. After preoperative measurement: 158cm/50kg, breast base width 13cm, she “named” the star shiny surface prosthesis. According to the “principle” of the breast base width minus 1.5cm, the principle of selecting the width of the prosthesis was selected, and the Xia-Xtra-295cc (11.5/4.0) SRM prosthesis underarm endoscope assisted double-plane technology was selected immediately after the operation. ! Looking at this 295 prosthesis, does it look “small”? Customers start to get tangled after they finish, is it too small? Because all the friends in the “group” suggest to do more than 300? Postoperative recovery process! Look at the month after surgery, does the prosthesis look “small”? Look at the comparison before and after surgery! Looking from the side, will this prosthesis “show smaller” on her body? At the same time, “nipple reduction and shortening” was also done! Summary: 1. Prosthesis breast augmentation surgery, the size of the prosthesis must be selected according to its own conditions, and it is impossible to blindly follow the opinions of “others”. 2. According to the conventional formula, the width of the prosthesis is roughly equal to the breast width minus 1.5 (±0.5 cm) cm. 3. If you want to increase the capacity of the prosthesis, you can choose the high-protrusion body, the prerequisite is that the skin must have a certain degree of relaxation! Finally, you must follow the advice of professionals (doctors), not netizens in the group, after all, they are not doctors. &nbsp.&nbsp.&nbsp.&nbsp.&nbsp.&nbsp.&nbsp.&nbsp.&nbsp.&nbsp.&nbsp.

Rhinoplasty: How much is the height of the nose?

If you have any questions about beauty plastic surgery, just click the blue word on the top and follow me. Many people are simply pursuing the height of the nose while ignoring the width and length of the nose, which leads to the lack of ideal results after the operation. . In fact, nose plastic surgery is a comprehensive plastic surgery. You must not simply pursue the height of the nose, but ignore the width, length and shape of the nostril. Generally speaking, the length of the nose is about 1/3 of the length of the face, the width of the nose is about 1/5 of the width of the face, the height of the nose tip is about the same as the width, the ratio of the length of the nose to the height of the nose tip is about 1.0: 0.67, The appearance of the nostrils is upward, oval, and its size is about 2/3 of the height of the nose. Rhinoplasty is a surgery to reshape the nose, which is one of the more common operations in plastic surgery. Rhinoplasty can increase or decrease the size of the nose. Change the shape of the back of the nose or the tip of the nose. Reduce the nostril and change the angle between the nose and the upper lip. Rhinoplasty can also correct certain congenital or post-traumatic deformities, and even help Relieve some breathing problems. The current rhinoplasty materials are roughly divided into two categories, self-organization and synthetic materials. Autologous tissues include autogenous bone tissue, autologous cartilage tissue and autologous soft tissue. Autologous tissue is generally not needed because autologous tissue requires the formation of a trauma on the patient’s body. The risk increases and patients are generally unwilling. In terms of synthetic materials, injections and prostheses are more commonly used. The swelling and bruising in the first few days after the operation may make you forget that your nose will look good. However, the healing of the operation is a slow and gradual process, and sometimes the final results take a while to be seen. After 1 to 2 weeks, the nose will recover as if it had not been operated on. The traditional method of nose plastic surgery generally uses a prosthesis to elevate the nose. No matter who, what conditions are “one high.” But many people still don’t look good after rhinoplasty. The reason is because they haven’t changed the original nose shape defect. If you want to make your nose look good and stylish, you must reshape your nose. This is a total beauty design plan for your nose. Before rhinoplasty, it is necessary to check whether the beautician is only a simple low nose deformity, and whether there are other types of nose that are not beautiful, such as hypertrophic nose, hump nose, blunt nose tip, hypertrophic nose, etc. Combined with the beautician’s occupation, age, face shape, and facial features, he sculptured a nasal prosthesis suitable for him.

How to repair double eyelids that are too wide and too narrow?

If you ask a hundred girls with single eyelid if they want double eyelid, you may get one hundred and thirty answers to want, because ten girls have said it three times ~ Although single eyelid also has unique charm and characteristics, you have to admit What double eyelid has gradually become the public aesthetic, but is double eyelid surgery really that simple? Why do many people have to fix it after finishing it? How to fix it? Let’s chat together today ~ First of all, double eyelid surgery is not simply a fold on the eye. A truly successful and dignified double eyelid should not only meet its own facial features, but also make the eyes full of charm. The essentials are the following: First, the double eyelids with a large double eyelid width to repair can not escape the fake wide width of the net red style of previous years. The biggest reason is that the width of the double eyelid is too wide. At first glance, people feel that these double eyelids are too fake. The width of the double eyelid is not as wide as you want, it should be determined according to the width of the eyelid plate. The facial features of Asians are not three-dimensional, and the eyebrows are low, so the width of the double eyelid is narrower than that of Europeans. It is generally between 5mm-8mm. Those smaller than this range belong to the inner double, and larger than this range will appear unnatural. This type of 4-5mm is a narrow double eyelid. With such a wide open eye, the eyelid is narrow. It is suitable for beauties who have large eyes and like a very natural style. Double eyelid with a distance of 6-7mm is more natural to open the eyes, which is also the width of most natural double eyelid people. Beauty seekers who generally want to be partial to nature or have a bit of style in nature are more suitable for this width. 8-9mm 8mm double eyelids are more suitable for beauties who have slender eyes. The distance above 9mm is too wide for most Chinese. If you want a wide European double, you need to match the length of the eye crack and the height of the eyebrow arch, otherwise it is very easy to become a “frog eye”. There is not an accurate standard for what kind of width is suitable for you. The basic conditions of the eye and the face shape of the beauty are determined, so it is better to make an appointment for a face consultation ~ & nbsp. Second, the dark eyeball exposure is full. The dark eyeball exposure is full when the front eye is straight, the height of the upper eyelid is probably in the cover Live 1/5 of the black eyeball, and the ratio of 1: 4 is excellent. The black eyeball exposure is 80% -85%, 85% -90% is the best, and after removing the excess skin and fat eyelashes of the upper eyelid Will slightly upturn at 45 degrees, forming a natural small eyelashes. 3. There is no excess inner canthus. In the last stage of science, we mentioned that the influence of inner canthus on the shape of the eye is very large. Good-looking eyes and double eyelids cannot be dragged by the inner canthus, so double eyelid surgery can be done. According to the situation, the operation of opening the inner corner of the eye can make the eyes larger and longer at the same time, and the recovery period can also be combined into one without additional holiday. After talking about what kind of good-looking eyes should be, let’s talk about what kind of eyes need to be repaired? First of all, the first and most important point is that those who seek beauty must choose a regular plastic surgery hospital and a qualified doctor to perform the operation. Never go to a studio without a bad, nail salon or be “friend” Fooling hands, because often 20 minutes in the studio can give you a double eyelid, but the eye repair doctor needs 20 years of hard work to repair it for you! When your eyes appear the following conditions, you should consider doing double eyelid repair! 1. Double eyelids are too wide, and the width and width of the eyes are inconsistent. The repair method: re-separate to reveal the anatomical level. The sunken eyes obviously need to be filled with tissue. It is better to use autologous fat tissue to restore the skin’s fullness and elasticity. 2. The serious repair method of meat strips: loosen the high adhesion, reset the levator aponeurosis, and strengthen the strength to achieve the purpose of eliminating meat strips. 3. The method of repairing incomplete eye closure after double eyelid surgery: loosening and separating the exposed anterior meibomian tissue and lifting the anterior margin of the upper eyelid muscle to re-fix it. 4. Double eyelid disappearance and asymmetric repair method: Double eyelid disappearance due to disappearing of embedding thread can be improved only by reoperation. The disappearance of the double eyelid asymmetry requires redesign and evaluation of the upper eyelid skin margin and open incision repair. 5. Three eyelid repair method: If it is a natural three eyelid, it can be repaired by cutting open double eyelid. If it is the first multi-layer eyelid caused by double eyelid surgery, you can choose to replace the orbital fat, remove the orbital fat from the orbital diaphragm, and lay the pad and the upper fold. If there is not enough orbital fat, you need to enter

After the operation, the meaty pot cannot let the jaw angle come back

After feedback from the baby, after finishing the mandibular angle, the face is visually larger, and then it is concluded that the mandibular angle cannot be done. This is another chestnut because I have eaten a certain food and broke the diarrhea and said that some food cannot be eaten. Let me explain first, in accordance with the principle of only talking about the popular science without any emotional color, although she may not be the surgery that I did here, my purpose for analysis is not to say that others have done well or not, nor to say that she What do you think, pure science. If someone feels unhappy to see it, do n’t blame me, just talk about it. What do you draw from it? 1. I do n’t know whether it is still in the recovery period of swelling, so there may be swelling factors. 2. The width of the face is composed of three widths. Before the popular science passed 10001 times, aside from the other two widths, only looking at one width said that the face is big and the face is small is a pseudo-proposition. 3. Mandibular angle surgery only solves the problem of bones in the mandibular angle, without changing the width of the cheekbones, nor the width of the temples of the upper head circumference. In the middle, we must grasp the contrast and visual effects of the upper, middle and lower, not the more cut, the better. 4. Visually big face and actually big face are two concepts, and it may not be clear why the face is big before surgery. This is a cognitive problem. You have to understand yourself before and after surgery, instead of listening to people to talk about a concept and then evaluating a concept. So for those babies who like to see case pictures, everyone’s situation is different, just look at it, don’t get stuck. 5. There are two kinds of bones and soft tissues in the face. If it is determined that the bone problem is solved, then only the soft tissues are left. If the masseter muscle has just been visited, only fat is left. 6. Only meat is left. If you are sure that you haven’t eaten fat within a short period of time, you will not have hormones during mandibular angle surgery, and will not cause fat to come to your face. How much meat there is now is still how much, this pot can not be thrown to the mandibular angle surgery to back, people are bone surgery, not responsible for fattening, crabs. 7. I have said that N + 1 times, you need to keep the corner, you want to keep the corner, you need to keep the corner. If you do not keep the corner or cut too much, the outer panel is often cut too often, and the meat often cannot be caught. Refer to the story of the squirrel face before. The feeling that the meat on both sides of the corner of the mouth will sag down is not inevitable for every mandibular angle surgery. This pot should not be backed by mandibular angle surgery, but depends on the choice of surgery and greed. 8. Each operation has its own mission (indications), where it is not correct to change, distinguish the location and the reason, neither exaggerate nor shrink. 9. Do n’t listen to the wind and rain in everything. Everyone ’s facial structure is different. Do n’t take this operation or not because someone has good or bad results. It ’s unexplained. This method is generally used for Chuan sales. , We are all people with formal education, don’t be led by someone without knowing it. I am a science and engineering man. I am used to 123 logic analysis in everything. In the past, chestnuts were used only for science, not to praise or laugh at people. Remember that I am a skeleton machine with no emotional color.

Why does the nose look three-dimensional enough on the side, but it looks short and slumped on the front?

A couple of days ago, Yan Yan, a private fan of Yan Fan, asked such a question: Why do I look three-dimensional on the side when I look at my nose, but the front is always flat and flat? Is it because my nose is too short? This is a very valuable question. I believe that some face powders have such doubts, so I will take this issue out and share it with you. Often our own thoughts, when we see that the nose is not three-dimensional, we often feel that the height of the nose is not enough, so the nose root is blindly raised. Not only does it not have a tall three-dimensional nose after the operation, but it becomes a “Avatar nose”. . So what exactly affects the three-dimensional sense of the front side of the nose? In many cases, it is not one kind, but many kinds, such as the height of the root of the nose, the width of the bridge of the nose (the back of the nose), and the tip of the nose. But among the several factors, the most important factor that is often overlooked by us is the width of the back of the nose. why? Let me talk about this knowledge point in detail. First of all, what is the width of the nose? The width of the middle of the line between the nose and eyebrows on both sides is the width of the back of the nose (we also often call the width of the bridge of the nose). How does the width of the back of the nose affect the three-dimensional perception of the front of the nose? In fact, the change in the width of the back of the nose and the lightness and darkness of the skin on both sides of the nose line affect the doctor’s judgment on the three-dimensional sense of the nose. If the width is small, the proportion of the nose on the face will be tightened visually, and the face will become wider. The larger the width, the larger the proportion of the face, the narrower the face. Choosing a proper width of the back of the nose can make your nose three-dimensional and exquisite, both front and side, and naturally harmonious with the face. So how do doctors control the width of the nose during nasal surgery? Generally, we are based on two aesthetic reference points: 1. & nbsp. & Nbsp. & Nbsp. & Nbsp. The distance between the width of the nose and the performance point of the nose tip is basically equal; 2. & nbsp. & Nbsp. & Nbsp. & Nbsp. The width of the nose and the width of the person are basically During similar operations, we adjusted the ratio of the width of the nose back according to this aesthetic standard. In terms of anatomy, adjusting the width of the cartilage fornix in the vault area is the key to controlling the effect of the frontal nose bridge after surgery. In short, the key to the three-dimensional sense of the nose is the adjustment of the width of the back of the nose, the width of the bony nose, and the adjustment of the nose uplift. Doctors often use a variety of methods to comprehensively design a natural, harmonious and three-dimensional nose shape based on each person’s different nose foundations and aesthetic proportions. But if you try to solve it by one method, most of you will lose sight of it. If you have questions about rhinoplasty, please feel free to write to me to help you with preliminary analysis and answers.

Is it better to cut the eyelids as wide as possible?

Why are some double eyelids natural? And some double eyelids can’t wait to see it’s fake ten meters away? In fact, whether the double eyelid is naturally related to its width and shape depends on its own situation. It can’t just be wide and large. There must be a correct concept for double eyelids, that is, do n’t follow blindly. Each person ’s specific situation is different, and the double eyelid may not be as wide as possible. The double eyelids are widened. First, the artificial traces are obvious and the shape is unnatural; second, it is easy to cause eye opening and fatigue; third, it is difficult to modify. Once the double eyelids are widened, the eyes do not open, but it is easy to cause traumatic upper eyelid. Sagging. How to determine the width of the cut double eyelid? & Nbsp. The design of the double eyelid should conform to the facial aesthetics, such as the aesthetic standards of “Three Courts and Five Eyes”. The eyes are bright and dignified, and they are in harmony with the face and other facial features. The width of the double eyelid surgery depends on a person’s face shape, the width of the eyebrow arch to the eyelid margin (that is, the width of the upper eyelid), the depth of the eye socket, and the thickness of the upper eyelid. The face is large and full, the distance between the eyebrow arch and the eyelid margin is wide, the eye socket is deep, and the double eyelid can be cut wider. On the contrary, it should be narrower. Orientals have narrow upper eyelids, flat eye sockets, low eyebrow arches, and thick upper eyelids. Double eyelids should not be made too wide, generally 6 to 8 mm. The width of the double eyelid, which is the distance between the line of the double eyelid and the upper lid margin, is mainly divided into three types: wide, moderate, and narrow. 1. Wide double eyelids (more than 8mm): suitable for people with long square face and high eyebrow arch. If your three-dimensional facial contour is not strong, the facial features are not three-dimensional, and the appearance is not Western-style, it is recommended not to do this double eyelid. Because the double eyelids are too wide, it will cause the eyes to become smaller, but the eyes will not open, and may even cause traumatic ptosis. In addition, occupations that often require makeup, such as stars, models, dancers, etc. can be considered. 2. Moderate double eyelid (6 ~ 8mm): It is most suitable for oriental people with flat face and low eyebrow arch. It will not cause “inner double” rebound and has a natural and obvious postoperative effect. 3. Narrow double eyelids (below 5mm): the effect is very natural, but when opening the eyes, it is easy to show the shape of the inner double, suitable for those with small eye cracks, want to cut the double eyelids, and worry about being discovered by others, and require a particularly natural effect Beauty seeker. In addition to the width of the double eyelid, there are also shapes. Common types are European type, crescent type, parallel type, flat fan type and open fan shape. In short, the double eyelid is not the same, and the one who meets his image temperament and eye conditions is best seen

Lower eyelid to

With the progress of the times, people’s aesthetics are getting higher and higher. From the perspective of eye plastic surgery, common double eyelid plasty, upper levator levator correction, inner canthus skin correction, and outer canthus can no longer satisfy the fairy. Our request for the window of the soul, more people began to put their eyes on the position of the lower eyelid. From the lower eyelid to the surgery came into being. 1. What is the lower eyelid? The lower eyelid originated in Japan and was invented by the Japanese doctor Hibiki. By changing the position of the lower eyelid, the eyelid crack can be enlarged in the vertical direction, making the exposed base of the black eyeball larger, which can effectively improve the eye drop. . The eye effects created are like “innocent Barbie eyes” and “naughty cat eyes”, and are popular among young women. The lower eyelid has three characteristics: minor surgery, large effect, and high satisfaction. & nbsp. Comparison before and after the operation 2. Steps from the lower eyelid to the operation: 1. Resection of the skin & nbsp. (1) The upper edge of the incision is about 2mm away from the eyelashes (2) The width of the excision is about 4-6mm. (3) The starting point is at the midpoint of the inner canthus and the inner edge of the cornea, and ends at the outer canthus. (4) The widest point is approximately at the midpoint between the outer edge of the cornea and the outer canthus. (5) Cut to the surface of the orbicularis oculi muscle, remove the skin, and retain the muscle. 2. Resection and fixation of the conjunctiva of the eyelid. (1) Place a corneal protective cover and suture the lower eyelid. (2) Cut through the blepharoconjunctival approach at the lower edge of the meibomian plate and separate it downward by about 8 mm. (3) Shorten the contraction of the lower eyelid, the width of the shortening is equal to the width of the skin removed at the leading edge. (4) The 5-0 absorbable thread fixes the lower blepharoplasty muscle to the lower edge of the meibomian plate and sutures 3 stitches. (5) 7-0 suture the skin. 3. Schematic diagram of the procedure from the lower eyelid to the surgery & nbsp. & Nbsp. & Nbsp. 4. Postoperative evaluation & nbsp. To the best state (10-15 degrees). 2. Expand the width of the eyes and move upward from the inside to the outside of the lower face, exposing dark eyeballs and white eyes, which can effectively expand the pupils. 3. It can make eyes look bigger. According to personal eye conditions and needs, I hope that the more natural, the operation can be reduced to a smaller range, if the later effect is strong, the range can be larger, if you can do it at the same time with the opening of the eye, the effect is better. 5. Surgical risks: The most common complication is misalignment of the lower eyelid. 1. Excessive removal of the anterior layer of tissue causes retraction of the lower eyelid. 2. The destruction of the middle layer tissue leads to scar contracture or adhesion (most common). 3. Excessive removal of the posterior layer of tissue leads to inversion of the eyelid.

80% of people regret after cutting their eyelids, it turns out that because …

Maybe you want to cut your double eyelids, but you have been doing your homework silently, but you never know which shape of double eyelids fits you, and you have been confused. Dr. Zhang meets a lot of little fairies every day during the face-to-face consultation. He takes photos of his favorite celebrities or celebrities to the doctor and says that he wants to reshape his double eyelid shape exactly, so he has to admit their The eyes are indeed very beautiful. Is it really good to look at other people ’s eyes when they are placed on your eyes? This is not necessarily the case. If you do n’t choose the right eyes for yourself, you may lose points. Yes, you must firmly believe that the one that suits you is the best! Today, Xiao Hai is here to give you a selection of the shape of your double eyelid under the popular science. 1. The type of double eyelid a. The parallel double eyelid. The double eyelid is basically parallel to the upper eyelid. The width of the inner, middle and outer double eyelid is about The same, suitable for girls who have large eyes, high eyebrow arch, long distance between eyebrows and eyes, and thin upper eyelids. If your face shape is awl face, melon seed face is particularly suitable for parallel double eyelids, b, fan-shaped double eyelids: similar to the intoxicating “quote peach eyes”, narrow inside and outside, the corners of the eyes slightly up. Suitable for women with moderate eyebrows and eyes, thin eyelids, large eyes and high eyebrow arches. Suitable for face shape: best with goose egg face! c. Crescent-shaped double eyelids like a crooked moon suitable for face shape: girl with a round cake face. With this kind of double eyelids that are wider inside and slightly narrower outside, it makes people look particularly enchanting. d. European-style (European-American) double eyelids, in terms of shape, are a combination of parallel and fan-shaped, which is a pair of double-fold eyelids that are wider on the inside and slightly narrower on the outside, suitable for girls with high cheekbones and high eyebrow arches. Through the overall facial features, reference to high nose concave eyes, it is more suitable for wide and deep double eyelids, and the facial three-dimensional sense is not obvious, suitable for narrow double eyelids. From the overall shape, double eyelid can be roughly divided into 4 types 1. Narrow: double eyelid with a width of 4-5mm. The effect will be more natural, but it will look similar to the inner double. 2. Moderate: Double eyelids with a width of 7-8mm. This width is the most natural and suitable for most beauty seekers. 3. Wider refers to double eyelids with a width of more than 1cm. This width is suitable for people with a rectangular face and a high eyebrow arch. It is generally not recommended that little fairies make such double eyelids, because the ratio of the width of the eyebrows is suitable, and there are relatively few people with obvious three-dimensional facial contours, and too few people meet these conditions. 4. Outer width and inner narrow: This double eyelid is suitable for a good eye foundation, and a rectangular face shape, suitable for a moderate distance between eyebrows and eyes, and thin eyelids. At the end of the article, Dr. Zhang still reminds babies who want to make double eyelids, no matter what face type, you can find the most suitable double eyelid shape. If you have plans to do double eyelid, you must first communicate with the plastic surgeon What kind of double eyelid is better for you? Don’t blindly imitate others, because what suits you is the most important! Otherwise, you will really regret it after cutting ~